Cisco Catalyst 3560-CX Series WS-C3560CX-8PT-S 8 Ports Managed Switch (2023)

WS-C3560CX-8PT-S Cisco Details

Buy Cisco Catalyst 3560-CX Series WS-C3560CX-8PT-S 8 Ports Managed Switch is available at BulkDevices UK.
We provide excellent customer service and we are always here when you need us.

Share your thoughts with other customers?

(Video) Cisco Catalyst (WS-C3560CG-8PC-S) 8-Ports PoE Ethernet Switch


Cancellation Policy - If a consumer or business account intends to cancel an order, we will not charge them anything extra upon receiving an email with the order reference number or PO number before the order dispatch process. Failing to email before the order is dispatched will incur a restocking fee of 25%.

In case the item has already been dispatched, we suggest consumers or business accounts not open the shipment upon its arrival. Within the next 14 days of the package’s arrival, customers may then arrange for the shipment to be returned. You may ensure your item is adequately re-packaged using the original outer packaging, otherwise, a 25% restocking fee may be charged.

Within 14 days of the signed goods by customers, we request the goods remain unused for us to receive them in a resalable condition, including all accessories, packing, etc. To avoid liability for lost goods, you must arrange insurance against the goods while they are in transit. Please also note that you will be required to organize and pay for the delivery return.

Our non-returnable and non-cancellable orders include orders that are shipped directly from manufacturers.

Non-Faulty Returns Conditions - In case we agree, at our sole discretion, to accept the return for credit of unwanted products, the Goods must be returned with our prior written agreement within fourteen days of delivery, they must be unopened, with the manufacturers' seals intact, and in a resalable condition. Whereas, all non-faulty returns are liable to a 25% to 50% restocking fee, depending on the circumstance, unless incorrectly supplied by Bulk Devices.

A 25% restocking fee will be charged in case customers fail to return incorrectly supplied items in their original condition, including the good’s accessories, manuals, software, and warranties – all should be undamaged. It is requested customers repack the goods in the same way they were delivered.

Faulty Items under Warranty - Please raise an RMA request immediately after you encounter a fault in your purchased item. Following are the terms and conditions to agree to before the RMA request:

(Video) M2 Equipments Introduction

  • Quote the order number, purchase date, and serial number of the faulty item.
  • Upon confirming the faulty product’s warranty, one of our engineers will try to resolve your problem over the phone or via remote access.
  • If the problem persists, an RMA Number will be issued and you will need to follow our standard RMA procedure.
  • Once the item has been returned, we will test it and fix the problem.
  • We will send a replacement if the item cannot be repaired. Replaced hardware may be either new or equivalent to new, and have an identical or equivalent specification.


Price Match Guarantee - Bulk Devices aims to provide you with the lowest prices possible of the product and give a guarantee that our prices will never exceed the competitor’s price.

Quality Assurance - We prioritize product quality for a better customer experience, and therefore, a complete check and balance is done for all the products before any shipment. We also make sure that all of our products are Original and Genuine. Both our products whether “New Sealed” or “Used/Refurbished” are certified for having the best standards.

Money-Back Guarantee - We have an Easy Return Policy, so in case of any inconvenience you can Exchange or Return the product ordered from Bulk Devices

Secure Payment & Shipment - Our customers trust us and we value this trust above all. Our suppliers ship our items on time and with complete safety, ensuring there is a secure payment method in place. Our verified authorization includes McAfee Security, VeriSign Secured.

Return Material Authorization (RMA) Process - In case of any returns, an RMA request should be raised after agreeing on the given terms and conditions:

  • It is mandatory on all the returns of Bulk Devices items regardless of the reason for return.
  • Items should be returned with all the accessories, manuals, software, and warranty claims. There should be no damage to the original packaging.
  • On receiving your RMA number, you will have to repack goods exactly as they were delivered to you, perhaps in the original outer box/package. A restocking fee of 50% will be charged if the original packaging is damaged.
  • To avoid return rejection, do not write directly on the original box/package.
  • To avoid return rejection, clearly mention on the outer box the RMA number.
  • Using a label, accurately and mention Bulk Devices’ full address on the outer package.
  • Once the shipment has been received and tested by our supply chain department, you will receive your exchanged product within 10 days of receipt of the damaged item.
  • Please note that in case of any discrepancies between your PO and the goods received, we must be informed within two days of receipt of the product.



What should I do if I don’t receive my order during the UPS’s scheduled time?

We suggest you check the Info/Notice you have received from UPS to learn if they allow a delivery re-attempt. Alternatively, you can try contacting UPS and ask for instructions related to the process. You can also leave a message for the driver on Info/Notice to instruct him how he should deliver the package; leave it at your doorstep or deliver it to a new location. We suggest you visit UPS’ website and enter your Info/Notice number, and you will then be able to change the delivery time or return your order to the shipper.

Is it possible for me to pick up my order?

BulkDevices offers you the convenience to pick up your package. To do so, simply select the “I want to use my shipper” shipment method, then type “will call” in all blank details before clicking update. After this, continue the checkout process as you normally would and wait for us to call you. We will call whenever your order has been processed and is ready for pick-up. Therefore, we request you do not visit the office unless notified.

Do we ship internationally?

Absolutely. We are proud to follow a very reliable customer-centric approach, benefitting customers all over the world with our products and services. While BulkDevices offers international shipment, it does not cover the customs duties and international shipment charges, which will have to be paid by the customer.

Do we ship to APO or FPO addresses?

Yes, indeed. We deliver to APO and FPO addresses. However, orders with such addresses will be shipped by the UK postal service only. We have no control over the delivery timings. While the general delivery time for APO and FPO orders is 5-10 working days, your order delivery might take about six to eight weeks.

Can I contact FedEx, if so, how?

You can contact FedEx on their official website:, or you may contact them on their toll-free number, at 1-800-463-3339 (1-800-GO-FEDEX).

Will BulkDevices pay for the shipping of a returned item that is defective or damaged upon arrival?

Unfortunately, BulkDevices does not pay for the shipping of defective parcels. However, we can accommodate you with mutually agreed upon negotiations. We will gladly replace and ship a new item to you, free of cost, if you are willing to pay for the return charges.

Free Standard Shipping

We will deduct the shipping charges from your refund amount if a non-defective item that was qualified for free standard shipping is returned for a refund. In case a free standard shipping item is returned by you due to it being defective, we will replace the item and provide you with free one-way ground shipping. However, if you cannot wait longer for the delivery, you will have to pay for the additional cost. In case of BulkDevices’s inability to find an item’s replacement, please rest assured we will refund your order's complete value.

(Video) Cisco Catalyst Switches - Upgrade IOS image

What should I do if an ordered item is missing from my package?

Please be sure to check the tracking numbers of all your received packages. If you are unable to find the items, please get in touch with our customer care or our Shipping Support Staff at [emailprotected] or call us at 020 8396 6933.

Shipping times - In all areas of the UK, BulkDevices makes use of UPS, FedEx, and USPS’ delivery services to ship products directly from its warehouses. All mentioned carrier services are our primary delivery partners. BulkDevices ships most orders within 24 hours after the order placement. Mentioned below is a list of our shipping services with their corresponding cut-off times:

Ground Shipping - In the UK ONLY, the transit time is between 3-7 business days, the cut-off time stands at 1 PM Central Time. Depending on your location, Ground orders may be delivered by either UPS.

Ground Shipping - In the UK ONLY, the transit time is between 3-7 business days, the cut-off time stands at 1 PM Central Time. Depending on your location, Ground orders may be delivered by either UPS.

UPS 3 Day- UPS orders take 3 business days in transit, however ONLY in the UK. UPS 3 Day’s cut-off time is 1 PM Central Time.

FedEx 2 Day- FedEx takes 2 business days in transit for orders placed ONLY in the UK, and the cut-off time is 1 PM Central Time.

Standard Overnight- Standard delivery service takes about one business day in transit for orders placed ONLY in the UK. Cut-off time is 1 PM Central Time. Depending on the location, we may deliver the order by UPS Red Saver or FedEx Standard Overnight service.

Priority Overnight- 1 business day transit time for an order placed in the UK ONLY, with the cut-off time at 1 PM Central Time. Depending on the location, we may deliver by UPS Red or FedEx P1 Overnight service, guaranteeing the delivery by 10:30 AM on the same day.

(Video) Learn How To Upgrade Firmware (IOS) on a Cisco 2960s Switch

International Shipping- Cut-off time for all international orders is 1 PM Central Time. We ship international orders using the FedEx International Economy method.

Saturday Delivery- It works for all orders that are placed on Friday, in all states of the UK ONLY. The cut-off is noon Central Time, and the orders may be shipped through UPS or FedEx’s Saturday Delivery method.

What is the Cut-off time?- Cut-off time mentions the time your order will be processed after order placement. If your order is placed before 1 PM Central Time, it will be processed on the same day, whereas if your order is placed after 1 PM Central Time, it will be processed on the following business day.

Please contact our Sales Department if you want your order to be shipped before or after the mentioned cut-off times and we will look into your request. Shipping Delays

  • Our shipment method does not process any orders on the weekends and holidays.
  • Since each order goes through a processing time, we request you to be patient. The shipping services are only guaranteed for the transit time, not including the time it takes to process the order. While most orders are shipped on the same day, sometimes orders might take longer.
  • We cannot guarantee set delivery times for orders that are placed with BulkDevices from Hawaii, Alaska, Puerto Rico, Canada, and other International locations.
(Video) Password reset for Cisco catalyst 3560 switch


How do I check my Cisco switch port status? ›

To display summary information on all of the ports on the switch, enter the show port command with no arguments. Specify a particular module number to see information on the ports on that module only. Enter both the module number and the port number to see detailed information about the specified port.

How much power does a Cisco 3560 8 port use? ›

The Cisco Catalyst 3560 8-port PoE and 24-port PoE configurations can support 8 and 24 simultaneous full-powered PoE ports at 15.4W for maximum powered-device support.

What is the default password for a Cisco Catalyst 3560 switch? ›

When prompted, enter the default password, cisco. The switch ignores text in the username field.

How to hard reset Cisco Catalyst? ›

Step 1. Disconnect all Ethernet cables from the switch. Step 2. Using a pin, press and hold the Reset button on the switch for 15 to 20 seconds.

How do I check port response? ›

Press the Windows key + R, then type "cmd.exe" and click OK. Enter "telnet + IP address or hostname + port number" (e.g., telnet 1723 or telnet 5000) to run the telnet command in Command Prompt and test the TCP port status. If the port is open, only a cursor will show.

How do I check my port security status? ›

Here is a useful command to check your port security configuration. Use show port-security interface to see the port security details per interface. You can see the violation mode is shutdown and that the last violation was caused by MAC address 0090.

How do I test a port switch? ›

Disconnect the Ethernet cable from "LAN 1" and plug it in to each of the remaining ports on the Ethernet switch. When testing each port, look for a blinking green light, and then test the connection by opening a Web browser on your laptop.

How much power does 8 port PoE use? ›

The power consumption of PoE switches is also linked with the port number to cater to different wattage requirements. For example, small PoE switches with 8 ports may come with 130W or 250W as an option, while a high port-density 48-port PoE switch may be available for up to 600W or even higher.

How many watts is an 8 port switch? ›

Port 8 can deliver up to 12W of power when powered by 802.3at PoE+, 48V passive PoE, or the included power adapter*. (If the power source is 802.3af PoE, then the PoE output budget will be less than 12W.)

How many watts does an 8 port switch use? ›

Each of the 8 PoE+ ports can supply up to 30 watts with a total PoE power budget of 140 watts. PoE is especially suitable for devices that are far from power outlets or when you want to minimise the clutter of extra cables.

What is the default IP and password for Cisco switch? ›

The default username is cisco. The default password is cisco.

What is the default username and password for cisco 3650? ›

The default username is admin and the default password is cisco.

How to reset cisco port? ›

You can use the "default interface giX/X " command in the config mode. It will reset the interface to its defaults.

What does Catalyst mean in cisco? ›

Catalyst is the brand for a variety of network switches, wireless controllers, and wireless access points sold by Cisco Systems. While commonly associated with Ethernet switches, a number of different types of network interfaces have been available throughout the history of the brand.

Which command is used to check ports status? ›

Run the Command Prompt as administrator. Type the command: netstat -ab and hit Enter. Wait for the results to load. Port names will be listed next to the local IP address.

What are common causes of port security violations? ›

A security violation occurs when the maximum number of MAC addresses has been reached and a new device, whose MAC address is not in the address table attempts to connect to the interface or when a learned MAC address on an interface is seen on another secure interface in the same VLAN.

How do you tell if a port on a switch is bad? ›

It will flash red if a fan has failed, and the switch will continue to operate. It will be solid red, and the corresponding port LED will flash amber/ green, if a port fails the loopback test at bootup. The switch will continue to operate, but the failed port will be disabled.

Do port switches go bad? ›

The problem of switch failure generally includes physical layer failure, port negotiation and self-loop issues , Vlan issues , device compatibility issues , and other problems. The superior performance of the switch and the substantial drop in price have promoted the rapid popularity of the switch.

What is the difference between PoE and PoE+? ›

The main difference between PoE (IEEE 802.3af standard) and PoE+ (802.3at) is the quantity of power delivered. PoE can provide 15.4 watts over Cat5 cables, while PoE+ can supply up to 30W over Cat5 cables, with 25.5W available to devices.

What is the difference between PoE PoE+ and PoE ++? ›

PoE+ switches support devices such as video IP phones, wireless access points with multiple antennas, and complex surveillance cameras. PoE++ switches can support devices that need higher power wattage such as video conferencing system components and building management devices, laptops, televisions, and so on.

What is the purpose of 8 port switch? ›

Among all the PoE switches, the 8-port Gigabit PoE switch is widely used in applications like IP camera systems, VoIP phones, and many more. Managed or Unmanaged Switches: As its name implies, the unmanaged switch being a plug and play switch provides basic connectivity and doesn't support any configuration interface.

What is the function of 8 port switch? ›

All-in-one security solutions for any small, medium or large enterprise. It allows convenient delivery of data and power at the same time from a single cable. It eliminates the need for AC or DC power supplies and outlets.

Can I connect two 8 port switches together? ›

Thus choosing an Ethernet switch with abundant ports is of great concern. However, one can also connect small switches like 8 port switches together by daisy chaining them. For SMBs and home usage, the choice between deploying a 24 port switch vs daisy-chaining 8 port switch has confused many people.

Why do I need a PoE switch? ›

A PoE switch allows compatible devices to work in places where power outlets or network connections don't exist. This primary function of PoE can save businesses lots of money on the costs of installing electrical and network wiring (more on that below) while still having edge devices work where they are needed.

How many ports should a switch have? ›

Most switches come with 24 or 48 ethernet ports; each one gives your internet-enabled devices a path to connect to other devices within your network. In some cases, picking how many ports you want is straightforward. Perhaps, you have more than 24 network devices or are replacing your current 48-port switch.

How many ports do I need on a switch? ›

Switches can have anywhere from 5-port to 52-port configurations. When considering the number of ports you'll need, you should think about the number of users your network supports. The larger your organization is, the more ports you'll need.

How do I reset a cisco switch to Rommon mode? ›

Press the break sequence (ctrl-Break) while the router is initializing to break into ROMMON prompt. 3. Follow this command, confreg 0x2142, to ignore the startup-configuration and reset or reload the router. 4.

Is there a way to hard reset a switch? ›

Press and hold the POWER Button down until the system resets; this may take some time. Once the system is powered down, press the POWER Button once to turn it back on.

Does hard reset on a switch delete anything? ›

All data in the system memory, including software, save data, screenshots, and user information will be deleted, restoring the console to factory settings.

Does factory resetting switch reset firmware? ›

This option returns your Switch to its out-of-the-box state, deleting all saved data, screenshots, videos, Switch user names, web browser data, game data, and system updates. It will also reset system settings like parental controls to their defaults.

How do I reset my switch without deleting everything? ›

While holding both the + and - volume buttons down, press the POWER Button. When the "Maintenance Mode" screen appears, release both volume buttons. Select "Initialize Console Without Deleting Save Data", and follow the on-screen instructions to complete the process.

How do you soft reset a switch? ›

To soft reset your Nintendo Switch, press and hold the power button for about five seconds. When you see Power Options, press it, then select Turn Off. Wait for the device to fully power down, then turn it on again.

What is the ROMmon boot mode? ›

For those of you that are not familiar with the term ROMmon (ROM monitor) mode, it is a bootstrap program that initializes the hardware and boots the Cisco IOS software when you power on or reload a router or switch.

How do I boot my switch in ROMmon mode? ›

Power off the switch, then press the MODE button and while keeping it pressed, plug the power back in. Keep the MODE button pressed and watch the console output.

Top Articles
Latest Posts
Article information

Author: Clemencia Bogisich Ret

Last Updated: 11/06/2023

Views: 5953

Rating: 5 / 5 (60 voted)

Reviews: 83% of readers found this page helpful

Author information

Name: Clemencia Bogisich Ret

Birthday: 2001-07-17

Address: Suite 794 53887 Geri Spring, West Cristentown, KY 54855

Phone: +5934435460663

Job: Central Hospitality Director

Hobby: Yoga, Electronics, Rafting, Lockpicking, Inline skating, Puzzles, scrapbook

Introduction: My name is Clemencia Bogisich Ret, I am a super, outstanding, graceful, friendly, vast, comfortable, agreeable person who loves writing and wants to share my knowledge and understanding with you.